|
View previous topic :: View next topic |
Author |
Message |
skjain.iitk General Sponsor

Joined: 26 Jan 2003 Posts: 104
|
Posted: Fri Jul 01, 2005 11:22 am Post subject: Reinforcement Identification |
|
|
Dear Colleagues:
Interesting reply from Tata Steel that they emboss the bars every one meter or so.
Do we know of other manufacturers too doing that? Do we have someone from SAIL on the e-conference? Will they like to respond?
With best regards,
Sudhir Jain
inchak@tatasteel.com wrote:
Quote: | ************************************************* SEFI e-Conference on Steel Reinforcement from June 27 to July 10, 2005 ************************************************* Sponsored by TATA Steel *************************************************
Dear Mr patel, Thank you very much I quote your letter and our response to the same
I am so happy that a conference has been organised on this subject. My thanks to all concerned. I am new to the forum and have numerous questions I would like to post but I will start with a site-related issue. Quite often we recommend Fe500 TMT bars. However a few weeks into the construction we are informed that there was amistake by the supplier and the bars sent were really Fe 415. This creates a lot of confusion and panic. I was wondering if it is not possible for steel suppliers to create a system of marking which clearly differentiates 415 from 500 steel. This should be a standard system used by all manufacturers.
OUR RESPONSE Tata steel Clearly EMBOSSES "TATA TISCON" for Fe 415, and "TISCON 500" for Fe 500 at an interval of at most one meter on each bar.
It is also rather tragic that ever since Torsteel pretty much winded us, there is no agency which provides a seal of quality conformance. As users we do not know which are good mills to take TMTY bars from. It is not always possible to buy steel form Tata, SAIL or Vizag steel as they are not interested in small quanitites.
OUR RESPONSE We do supply small quantities from our stock yards even to individual house builders.We are a BIS Licensee and do provide a BIS Test Certificate for every consignment.
I would appreciate if someone form Tata Steel whoa responsoring the E-conference could respond to my queries.
Thanks, Indranil Chakrabarti
********************************DISCLAIMER*********************************** Information contained and transmitted by this e-mail is confidential and proprietary to Tata Steel Ltd. and is intended for use only by the addressee. If you are not the intended recipient , you are notified that any dissemination or copying of this e-mail is strictly prohibited and you are requested to delete this e-mail immediately and notify the originator. Tata Steel does not enter into any binding agreement with any party by e-mail. Any views expressed by an individual do not necessarily reflect the view of Tata Steel. Tata Steel is not responsible for the consequences of any actions taken on the basis of information provided. While this e-mail has been checked for all known viruses the addressee should also scan for viruses. To know more about Tata Steel please visit www.tatasteel.com ********************************************************************************
The views, opinions, analyses and assessments contained herein do not necessarily reflect the views of SEFI or TATA Steel. Also SEFI and TATA Steel does not guarantee the accuracy of the data included in the proceedings of this e-conference and accepts no responsibility for any consequences of their use. ******************************************* ========powered by Reach1to1 Office Everywhere (http://www.reach1to1.com)======
|
Posted via Email |
|
Back to top |
|
 |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You can attach files in this forum You can download files in this forum
|
|
|
|