www.sefindia.org

STRUCTURAL ENGINEERING FORUM OF INDIA [SEFI]

 Forum SubscriptionsSubscriptions DigestDigest Preferences   FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups  RegisterRegister FAQSecurity Tips FAQDonate
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log in to websiteLog in to websiteLog in to websiteLog in to forum 
Warning: Make sure you scan the downloaded attachment with updated antivirus tools  before opening them. They may contain viruses.
Use online scanners
here and here to upload downloaded attachment to check for safety.

IS 1200 Part 8 - Measurement Clarifications

 
Post new topicReply to topic Thank Post    www.sefindia.org Forum Index -> Econference on State of Structural Engineering Practice and Education
View previous topic :: View next topic  
Author Message
balancbv
SEFI Member
SEFI Member


Joined: 11 Apr 2016
Posts: 1

PostPosted: Mon Apr 11, 2016 4:38 am    Post subject: IS 1200 Part 8 - Measurement Clarifications Reply with quote

Dear Sirs,

As per IS 1200 Part 8 - measurement conditions, the structural steel elements shall be measured as below;

4.3 Unless otherwise specified, mass of cleats,
brackets, packing pieces, bolts, nuts, washers,
distance pieces, separators, diaphragm, gussets
( taking overall rectangular dimensions), fish
plates, etc, shall be added to the weight of
respective ite D1S. In riveted work, allowance i~
to be made for mass of rivet heads ( see 3.1 ).
No deduction shall be made for rivet or bolt
holes ( excluding holes for anchor or holding
down bolts ). Deduction in case of rivet or bolt
hole shall, however, be made if its area exceeds
002 rol and for notch if its area exceeds 0,05 mt .
For other type of openings like holes for service
pipe etc, deduction shall be made if its area
exceeds 0'1 mi.

However there are few things are not explained in detail hence the interpretation can different between anyone.

For plates, if the notch area is less than 0.05sqm the weight of notch portion can included to the element weight and the same to be paid by the buyer. If the notch area is greater than 0.05sqm then the weight of notch portion shall be considered or claimed.

Is that the same condition is applicable for rolled sections? As my understanding the same condition is applicable is sections as well. Please clarify.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topicReply to topic Thank Post    www.sefindia.org Forum Index -> Econference on State of Structural Engineering Practice and Education All times are GMT
Page 1 of 1

 

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


© 2003, 2008 SEFINDIA, Indian Domain Registration
Publishing or acceptance of an advertisement is neither a guarantee nor endorsement of the advertiser's product or service. advertisement policy