www.sefindia.org

STRUCTURAL ENGINEERING FORUM OF INDIA [SEFI]

 Forum SubscriptionsSubscriptions DigestDigest Preferences   FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups  RegisterRegister FAQSecurity Tips FAQDonate
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log in to websiteLog in to websiteLog in to websiteLog in to forum 
Warning: Make sure you scan the downloaded attachment with updated antivirus tools  before opening them. They may contain viruses.
Use online scanners
here and here to upload downloaded attachment to check for safety.

Min. Horizontal Reinforcement For Slender Structural Walls As Per IS 13920 : 2016

 
Post new topicReply to topic Thank Post    www.sefindia.org Forum Index -> SEFI General Discussion
View previous topic :: View next topic  
Author Message
Mayur Mistry
SEFI Member
SEFI Member


Joined: 17 Sep 2016
Posts: 7

PostPosted: Wed Oct 11, 2017 7:50 pm    Post subject: Min. Horizontal Reinforcement For Slender Structural Walls As Per IS 13920 : 2016 Reply with quote

Hi SEFIians,

For slender structural wall in tall buildings,  (high hw/Lw),  value of rho h min.  is very high ( > 10 %).  Is equation for rho h min.  given correct in IS 13920 : 2016.  Can you please guide
Back to top
View user's profile Send private message
hemal
...
...


Joined: 01 Apr 2008
Posts: 126

PostPosted: Thu Oct 12, 2017 2:19 am    Post subject: Reply with quote

Dear mayur,Plz note that there is mistake in euation of rho_h for slender wall. (rho_h-0.0025) in this equation shall be replaced by (rho_v-0.0025).In june 2017 at delhi workshop, BIS informed that they are planning to release ammendments to IS 13920, IS 1893 and tall building code by the end of july 2017. But unfortunately they are released yet. RegardsHemal MistrySurat
Back to top
View user's profile Send private message
Mayur Mistry
SEFI Member
SEFI Member


Joined: 17 Sep 2016
Posts: 7

PostPosted: Thu Oct 12, 2017 2:38 pm    Post subject: Reply with quote

Thank you Sir. I used (rho_v net - 0.0025) while calculating rho_h min. Then also I am getting high rho_h min. requirement.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topicReply to topic Thank Post    www.sefindia.org Forum Index -> SEFI General Discussion All times are GMT
Page 1 of 1

 

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


© 2003, 2008 SEFINDIA, Indian Domain Registration
Publishing or acceptance of an advertisement is neither a guarantee nor endorsement of the advertiser's product or service. advertisement policy