Warning: Make sure you scan the downloaded attachment with updated antivirus tools before opening them. They may contain viruses. Use online scanners here and here to upload downloaded attachment to check for safety.
Posted: Tue Mar 13, 2018 1:57 pm Post subject: Econference on IS 16700 Clause 220.127.116.11
Dear Sirs,Under floor system 5.6 sub clause 18.104.22.168 it is mentioned that "At any storey , the minimum width of floor slab along any section after deduction of openings shall not be less than 5 m and the minimum width of the slab beyond an opening to edge shall not be less than 2m".
Can anyone clarify the above clause also is it 5 sq m instead of 5 m.
However further to this query, I would like to know if this applies to the staircase and lift cores also.
1.The lift and staircases are not parts of diaphragm and thus have to be considered as openings.
2. The code recommends to have shear walls (mostly staircase and lift cores) to be well distributed and thus the best location is at all 4 corners of the building.
3. Staircases have to be the edges of the building for fire safety and ventilation requirements.
4. Services shafts are also at the periphery of the building.
Thus it is generally not possible to have 2m slab outside the openings in these areas.
However all these areas are confined by beams or walls, so can this clause be ignored in these cases?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum