www.sefindia.org

STRUCTURAL ENGINEERING FORUM OF INDIA [SEFI]

 Forum SubscriptionsSubscriptions DigestDigest Preferences   FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups  RegisterRegister FAQSecurity Tips FAQDonate
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log in to websiteLog in to websiteLog in to websiteLog in to forum 
Warning: Make sure you scan the downloaded attachment with updated antivirus tools  before opening them. They may contain viruses.
Use online scanners
here and here to upload downloaded attachment to check for safety.

Query about Tata Structura steel mechanical properties

 
Post new topicReply to topic Thank Post    www.sefindia.org Forum Index -> SEFI General Discussion
View previous topic :: View next topic  
Author Message
sushant_goel
...
...


Joined: 15 Sep 2010
Posts: 52

PostPosted: Thu Oct 11, 2018 9:40 am    Post subject: Query about Tata Structura steel mechanical properties Reply with quote

Hello,
Please refer to the attached extract from Tata Structura steel brochure which states the mechanical properties of YST310. I have the following queries and would be glad if someone could share their knowledge with me.

1. Minimum yield stress (310MPa) and minimum UTS (450MPa) is clear. Why is the allowable axial stress in tension (186MPa), allowable bending stress in T or C (205 MPa), allowable shear stress (140MPa) and bearing stress (232MPa) less than the minimum yield stress value?

2. What is the difference between yield stress and equivalent stress?

3. Equivalent stress is given as 279 MPa. Is it correct to use the values given in point no. 1 in the formula "[(Axial stress)^2+3(Shear stress)^2]^0.5" to derive this value of 279 MPa?



Extract from Tata Structura_YST310.PNG
 Description:
 Filesize:  70.17 KB
 Viewed:  322 Time(s)

Extract from Tata Structura_YST310.PNG



_________________
Sushant Goel
Director
Eckersley O'Callaghan India Pvt Ltd
Back to top
View user's profile Send private message
sakumar79
...
...


Joined: 18 Apr 2008
Posts: 713

PostPosted: Thu Oct 11, 2018 2:47 pm    Post subject: Reply with quote

Dear Er Sushant Goel,
    With reference to your first query, please note that the allowable stress is probably worked out as per old IS 800 in working stress method (for tension, allowable stress is 0.6 fy, etc)

Yours sincerely
Arunkumar
Back to top
View user's profile Send private message
sushant_goel
...
...


Joined: 15 Sep 2010
Posts: 52

PostPosted: Fri Oct 12, 2018 8:09 am    Post subject: Reply with quote

Dear Arun Kumar,

Thanks for rightly pointing out that working stress method has been used to calculate the allowable axial stress in tension (0.60*310=186MPa). I was trying to figure it out using the limit state method.

Regards,
Sushant
Back to top
View user's profile Send private message
u.mukesh
General Sponsor
General Sponsor


Joined: 26 Jan 2003
Posts: 99
Location: Delhi

PostPosted: Wed Dec 05, 2018 12:30 pm    Post subject: Query about Tata Structura steel mechanical propertie Reply with quote

Hello Shushant


The permissible stresses are not equal to Yield stresses in any case.For instance axial tensile stress in Working Stress method is 0.6*fy (310x0.6 =186 MPa).


Even in limit state we restrict permissible stresses upto 0.87 fy. 


Regards
Mukesh Upadhyay


On Thu, Oct 11, 2018 at 5:12 PM sushant_goel <forum@sefindia.org (forum@sefindia.org)> wrote:

Quote:
           Hello,
Please refer to the attached extract from Tata Structura steel brochure which states the mechanical properties of YST310. I have the following queries and would be glad if someone could share their knowledge with me.

1. Minimum yield stress (310MPa) and minimum UTS (450MPa) is clear. Why is the allowable axial stress in tension (186MPa), allowable bending stress in T or C (205 MPa), allowable shear stress (140MPa) and bearing stress (232MPa) less than the minimum yield stress value?

2. What is the difference between yield stress and equivalent stress?

3. Equivalent stress is given as 279 MPa. Is it correct to use the values given in point no. 1 in the formula "[(Axial stress)^2+3(Shear stress)^2]^0.5" to derive this value of 279 MPa?
     


Sushant Goel
MSc Uni Stuttgart
     



     
Download Attachments:
Extract from Tata Structura_YST310.PNG




Posted via Email
Back to top
View user's profile Send private message
sushant_goel
...
...


Joined: 15 Sep 2010
Posts: 52

PostPosted: Sun Jul 14, 2019 2:14 pm    Post subject: Re: Query about Tata Structura steel mechanical propertie Reply with quote

Dear Mr Upadhyay,

Thank you very much for responding to my query.

Regards,
Sushant Goel

u.mukesh wrote:
Hello Shushant


The permissible stresses are not equal to Yield stresses in any case.For instance axial tensile stress in Working Stress method is 0.6*fy (310x0.6 =186 MPa).


Even in limit state we restrict permissible stresses upto 0.87 fy.


Regards
Mukesh Upadhyay


On Thu, Oct 11, 2018 at 5:12 PM sushant_goel <forum> wrote:

Quote:
            Hello,
Please refer to the attached extract from Tata Structura steel brochure which states the mechanical properties of YST310. I have the following queries and would be glad if someone could share their knowledge with me.

1. Minimum yield stress (310MPa) and minimum UTS (450MPa) is clear. Why is the allowable axial stress in tension (186MPa), allowable bending stress in T or C (205 MPa), allowable shear stress (140MPa) and bearing stress (232MPa) less than the minimum yield stress value?

2. What is the difference between yield stress and equivalent stress?

3. Equivalent stress is given as 279 MPa. Is it correct to use the values given in point no. 1 in the formula "[(Axial stress)^2+3(Shear stress)^2]^0.5" to derive this value of 279 MPa?
     


Sushant Goel
MSc Uni Stuttgart
     



     
Download Attachments:
Extract from Tata Structura_YST310.PNG




Posted via Email
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topicReply to topic Thank Post    www.sefindia.org Forum Index -> SEFI General Discussion All times are GMT
Page 1 of 1

 

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


© 2003, 2008 SEFINDIA, Indian Domain Registration
Publishing or acceptance of an advertisement is neither a guarantee nor endorsement of the advertiser's product or service. advertisement policy