View previous topic :: View next topic |
Author |
Message |
uhvaryani General Sponsor
Joined: 21 May 2008 Posts: 258
|
Posted: Sat Dec 14, 2019 7:30 am Post subject: Design of Corner Eccentric Footing on Both Sides |
|
|
Dear Er.E.S.Jayakumar,Sir,Eccentric footings on the property-line are given in Chapter 18 of the book,
"Design Aids for Limit State Design of Reinforced Concrete Members" by
U.H.Varyani and A.Radhaji.
These are called side-bearing footings and the philosophy is given by W.Fuchssteiner,Beton Kalendar,Part 2,.
These systems may be used for light column loads.
Sir, I am a great admirer of your contributions in the forum.
with best wishes and regards,
uhvaryani
Posted via Email
|
|
Back to top |
|
|
es_jayakumar General Sponsor
Joined: 24 Nov 2011 Posts: 1408 Location: Cochin
|
Posted: Sat Dec 14, 2019 3:33 pm Post subject: |
|
|
Dear Varyani sr,
It is a great honour to receive your appreciation !
It is learned in theory that when the point of application (eccentricity ) of vertical load on the footing is outside the rhombus of diagonals l/3 & b/3, tension will develop in soil, which is undesirable. The practical solution is to provide combined footing or cantilever footing.
Thanks once again for your encouragement !
Regards,
E S Jayakumar
|
|
Back to top |
|
|
parthajyoti_deka SEFI Member
Joined: 28 Nov 2010 Posts: 1
|
Posted: Fri Dec 20, 2019 7:49 am Post subject: PDF Version of book "Design Aids for Limit State Design of Reinforced Concrete Members" |
|
|
Sir,
Please send me the PDF copy of the book "Design Aids for Limit State Design of Reinforced Concrete Members" by U.H.Varyani and A.Radhaji. This book is not available with the Publisher also.
My email ID : partha25@gmail.com
Regards
Parthajyoti Deka
|
|
Back to top |
|
|
uhvaryani General Sponsor
Joined: 21 May 2008 Posts: 258
|
Posted: Tue Dec 24, 2019 5:30 am Post subject: Design of Corner Eccentric Footing on Both Sides |
|
|
Dear Er.E.S.Jayakumar,This has reference to book "DESIGN TABLES FOR FOLDED PLATES"
by UHVARYANI and KNTANEJA.I talked to my publisher.He says it is available
with him.Later on he will put this book on his e-portal.
You may contact him on the following address:
Mr.Sandeep Jain,today and tomorrow's printers and publishers'
4435 ansari road,daryaganj' NEW DELHI-110002
telephone 011-23241021
e-mail ttpp@vsnl.net.in (ttpp@vsnl.net.in)
with best wishes and regards'
uhvaryani
Posted via Email
|
|
Back to top |
|
|
mandagiri_balaramulu SEFI Member
Joined: 03 Feb 2019 Posts: 3
|
Posted: Thu Jan 02, 2020 10:30 am Post subject: Design Corner Eccentric Footing on Both Side |
|
|
Dear Structural Engineers,
A sketch plan showing the design detailing of eccentric footing for the column at plot boundary is attached to share my idea with all learned team. This Can be followed where combined footing is going to become more costly.
Regards
M. BALARAMULU, M.E (str), M. I. E.
Consulting Stru. Engineer & Sr. Vice President, GVPL.
On Sat, 14 Dec 2019, 17:28 uhvaryani, <forum@sefindia.org (forum@sefindia.org)> wrote:
Quote: | Dear Er.E.S.Jayakumar,Sir,Eccentric footings on the property-line are given in Chapter 18 of the book,
"Design Aids for Limit State Design of Reinforced Concrete Members" by
U.H.Varyani and A.Radhaji.
These are called side-bearing footings and the philosophy is given by W.Fuchssteiner,Beton Kalendar,Part 2,.
These systems may be used for light column loads.
Sir, I am a great admirer of your contributions in the forum.
with best wishes and regards,
uhvaryani
|
Posted via Email
Warning: Make sure you scan the downloaded attachment with updated antivirus tools before opening them. They may contain viruses. Use online scanners here and here to upload downloaded attachment to check for safety.
|
Description: |
|
Download |
Filename: |
DESIGN_OF_ECENTRIC_FOOTING_AT_PLOT_BOUNDARY._(FOR_PERSUAL_OF_ALL_STRUCTURAL_ENGINEERS).pdf |
Filesize: |
98.59 KB |
Downloaded: |
1117 Time(s) |
|
|
Back to top |
|
|
laxmi_hari SEFI Member
Joined: 18 Feb 2009 Posts: 2
|
Posted: Sat Jan 04, 2020 6:30 am Post subject: Design Corner Eccentric Footing on Both Side |
|
|
Dear Sir, For building structures even for small building the Bending moment at the intersection of Footing and column is bi-axial , hence to footing should be symmetrical to counter the bending moment and punching shear. The footing as shown in the drawing can be used for column footing of compound wall, unsymmetrical pile caps etc. These kind of footings should not be used for residential buildings ,offices etc where safety is of utmost importance. Regards V.L.Har On Thu, 02 Jan 2020 19:05:32 +0530 "mandagiri_balaramulu" wrote > Dear Structural Engineers, > > A sketch plan showing the design detailing of eccentric footing for the column at plot boundary is attached to share my idea with all learned team. This Can be followed where combined footing is going to become more costly. > > > Regards > M. BALARAMULU, M.E (str), M. I. E. > Consulting Stru. Engineer & Sr. Vice President, GVPL. > > > On Sat, 14 Dec 2019, 17:28 uhvaryani, wrote: > > --auto removed--
Posted via Email
|
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
|
|