www.sefindia.org

STRUCTURAL ENGINEERING FORUM OF INDIA [SEFI]

 Forum SubscriptionsSubscriptions DigestDigest Preferences   FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups  RegisterRegister FAQSecurity Tips FAQDonate
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log in to websiteLog in to websiteLog in to websiteLog in to forum 
Warning: Make sure you scan the downloaded attachment with updated antivirus tools  before opening them. They may contain viruses.
Use online scanners
here and here to upload downloaded attachment to check for safety.

WEBINAR -116 : Earthquake Resistant Design of High Rise RCC Structures - Modelling, Analysis & Design, 19 Dec 2020

 
Post new topicReply to topic Thank Post    www.sefindia.org Forum Index -> SEFI General Discussion
View previous topic :: View next topic  
Author Message
admin
Site Admin
Site Admin


Joined: 21 Feb 2008
Posts: 571
Location: Phoenix Webtech Pvt. Ltd. Mumbai [

PostPosted: Wed Dec 02, 2020 5:52 am    Post subject: WEBINAR -116 : Earthquake Resistant Design of High Rise RCC Structures - Modelling, Analysis & Design, 19 Dec 2020 Reply with quote

This is a sponsored Media Announcement. (Advt.) Sponsor assumes responsibility of content below. To communicate further in this regard use contact links provided in the message below.

ANNOUNCEMENT of WEBINAR -116


Earthquake Resistant Design of High Rise RCC Structures - Modelling, Analysis & Design
by Prof (Dr.) Yogendra Singh - IIT, Roorkee


Topics to be covered in this Webinar -

1.      Introduction to earthquake analysis  Response spectrum vs. time history
2.       Modelling of RC structures  Frame, Shear wall, Flat Slab, URM infills, Joints, Floor diaphragms, Foundations  Common errors            and pitfalls
3.       Code provisions on modelling and analysis  Stiffness of cracked RC sections, Flanged beams, Inter-storey drift, P-Delta effects
4.       Interpretation of analysis results for design  design of shear walls and slabs using results of FE analysis
5.       Earthquake resistant design - Code provisions and their background
6.       Ductile detailing of RC components  Capacity design, detailing of beams, columns, joints, gravity columns, flat slabs
7.       Design and detailing of planar and non-planar shear walls and coupling beams, slab-wall connection
8.       ..... and complete real life example of a modern RCC tall building with different complications, in the last session


When: Saturday, December 19th, 2020 @11:00 AM to 6:30PM (IST)
Fees  Rs. 750/- (including GST; GST No. 27AAACE8333R1Z3)


Register for this webinar, visit :  https://www.sefindia.org/?q=node/770


Who Should Attend:

Practicing Structural Consultants, Corporate Consultants, Govt/Semi Govt Authorities, Faculties of Structural Department from Engineering Colleges, PG Students





For assistance


Viha Pol (Workshop Coordinator)
M: 9152031321
E: secretary@epicons.com (secretary@epicons.com)

Hitali Firake (Workshop Coordinator)
M: 7798155001
E: infra@epicons.com (infra@epicons.com)


Regards,

Epicons Friends of Concrete
Jayant Kulkarni
(Webinar Convener)
216/A, Amargian Complex, Khopat, LBS Road, Thane 400601, Maharashtra, INDIA. +91 22 25471144 / +91 7798155001

Posted via Email



Warning: Make sure you scan the downloaded attachment with updated antivirus tools  before opening them. They may contain viruses.
Use online scanners
here and here to upload downloaded attachment to check for safety.
webinar-reminder.pdf
 Description:

Download
 Filename:  webinar-reminder.pdf
 Filesize:  315.7 KB
 Downloaded:  627 Time(s)


Warning: Make sure you scan the downloaded attachment with updated antivirus tools  before opening them. They may contain viruses.
Use online scanners
here and here to upload downloaded attachment to check for safety.
Webinar_116__1_.pdf
 Description:

Download
 Filename:  Webinar_116__1_.pdf
 Filesize:  303.89 KB
 Downloaded:  621 Time(s)



Last edited by admin on Wed Dec 16, 2020 7:19 am; edited 1 time in total
Back to top
View user's profile Send private message Visit poster's website AIM Address Yahoo Messenger MSN Messenger
bvrvrsec
SEFI Member
SEFI Member


Joined: 10 May 2020
Posts: 3

PostPosted: Thu Dec 03, 2020 5:30 am    Post subject: WEBINAR -116 : Earthquake Resistant Design of High Rise RCC Structures - Modelling, Analysis & Design, 19 Dec 2020 Reply with quote

Thank madam for your kindness.

On Wed, Dec 2, 2020 at 7:52 PM admin <forum@sefindia.org (forum@sefindia.org)> wrote:

Quote:
           This is a sponsored Media Announcement. (Advt.) Sponsor assumes responsibility of content below. To communicate further in this regard use contact links provided in the message below.

ANNOUNCEMENT of WEBINAR -116


Earthquake Resistant Design of High Rise RCC Structures - Modelling, Analysis & Design
by Prof (Dr.) Yogendra Singh - IIT, Roorkee

Topics to be covered in this Webinar -

1.      Introduction to earthquake analysis Response spectrum vs. time history
2.       Modelling of RC structures Frame, Shear wall, Flat Slab, URM infills, Joints, Floor diaphragms, Foundations Common errors            and pitfalls
3.       Code provisions on modelling and analysis Stiffness of cracked RC sections, Flanged beams, Inter-storey drift, P-Delta effects
4.       Interpretation of analysis results for design design of shear walls and slabs using results of FE analysis
5.       Earthquake resistant design - Code provisions and their background
6.       Ductile detailing of RC components Capacity design, detailing of beams, columns, joints, gravity columns, flat slabs
7.       Design and detailing of planar and non-planar shear walls and coupling beams, slab-wall connection
8.       ..... and complete real life example of a modern RCC tall building with different complications, in the last session


When: Saturday, December 19th, 2020 @11:00 AM to 6:30PM (IST)
Fees Rs. 750/- (including GST; GST No. 27AAACE8333R1Z3)


Register for this webinar, visit :  https://www.sefindia.org/?q=node/770


Who Should Attend:

Practicing Structural Consultants, Corporate Consultants, Govt/Semi Govt Authorities, Faculties of Structural Department from Engineering Colleges, PG Students 


Regards,
Epicons Friends of Concrete
Jayant Kulkarni
(Webinar Convener)
216/A, Amargian Complex, Khopat, LBS Road, Thane 400601, Maharashtra, INDIA. +91 22 25471144 / +91 7798155001
     



     
Download Attachments:
Webinar_116__1_.pdf





Posted via Email
Back to top
View user's profile Send private message
aadarsha
SEFI Member
SEFI Member


Joined: 30 Jul 2019
Posts: 1

PostPosted: Thu Dec 03, 2020 5:30 am    Post subject: WEBINAR -116 : Earthquake Resistant Design of High Rise RCC Structures - Modelling, Analysis & Design, 19 Dec 2020 Reply with quote

Dear SIr,It's me Aadarsha Lamichhane from Nepal. Can Nepalese engineers apply for this webinar? If we can then what is the procedure for payment? 
Best Regards,
Structural Engineer
Ministry of Physical Infrastructure Development
Gandaki Province
President

Leo Club of Lekhnath


aadarshalc5@gmail.com (aadarshalc5@gmail.com)Pokhara 27 Nepal







On Wed, Dec 2, 2020 at 6:35 PM admin <forum@sefindia.org (forum@sefindia.org)> wrote:

Quote:
           This is a sponsored Media Announcement. (Advt.) Sponsor assumes responsibility of content below. To communicate further in this regard use contact links provided in the message below.

ANNOUNCEMENT of WEBINAR -116


Earthquake Resistant Design of High Rise RCC Structures - Modelling, Analysis & Design
by Prof (Dr.) Yogendra Singh - IIT, Roorkee

Topics to be covered in this Webinar -

1.      Introduction to earthquake analysis Response spectrum vs. time history
2.       Modelling of RC structures Frame, Shear wall, Flat Slab, URM infills, Joints, Floor diaphragms, Foundations Common errors            and pitfalls
3.       Code provisions on modelling and analysis Stiffness of cracked RC sections, Flanged beams, Inter-storey drift, P-Delta effects
4.       Interpretation of analysis results for design design of shear walls and slabs using results of FE analysis
5.       Earthquake resistant design - Code provisions and their background
6.       Ductile detailing of RC components Capacity design, detailing of beams, columns, joints, gravity columns, flat slabs
7.       Design and detailing of planar and non-planar shear walls and coupling beams, slab-wall connection
8.       ..... and complete real life example of a modern RCC tall building with different complications, in the last session


When: Saturday, December 19th, 2020 @11:00 AM to 6:30PM (IST)
Fees Rs. 750/- (including GST; GST No. 27AAACE8333R1Z3)


Register for this webinar, visit :  https://www.sefindia.org/?q=node/770


Who Should Attend:

Practicing Structural Consultants, Corporate Consultants, Govt/Semi Govt Authorities, Faculties of Structural Department from Engineering Colleges, PG Students 


Regards,
Epicons Friends of Concrete
Jayant Kulkarni
(Webinar Convener)
216/A, Amargian Complex, Khopat, LBS Road, Thane 400601, Maharashtra, INDIA. +91 22 25471144 / +91 7798155001
     



     
Download Attachments:
Webinar_116__1_.pdf





Posted via Email
Back to top
View user's profile Send private message
Rajkumar1990
SEFI Member
SEFI Member


Joined: 13 Nov 2020
Posts: 1

PostPosted: Thu Dec 03, 2020 9:30 am    Post subject: WEBINAR -116 : Earthquake Resistant Design of High Rise RCC Structures - Modelling, Analysis & Design, 19 Dec 2020 Reply with quote

Thank you very much.. But I want to know that in which software the above mentioned designs will perform like staad or Etabs? 

On Wed, 2 Dec 2020, 2:39 pm admin, <forum@sefindia.org (forum@sefindia.org)> wrote:

Quote:
           This is a sponsored Media Announcement. (Advt.) Sponsor assumes responsibility of content below. To communicate further in this regard use contact links provided in the message below.

ANNOUNCEMENT of WEBINAR -116


Earthquake Resistant Design of High Rise RCC Structures - Modelling, Analysis & Design
by Prof (Dr.) Yogendra Singh - IIT, Roorkee

Topics to be covered in this Webinar -

1.      Introduction to earthquake analysis Response spectrum vs. time history
2.       Modelling of RC structures Frame, Shear wall, Flat Slab, URM infills, Joints, Floor diaphragms, Foundations Common errors            and pitfalls
3.       Code provisions on modelling and analysis Stiffness of cracked RC sections, Flanged beams, Inter-storey drift, P-Delta effects
4.       Interpretation of analysis results for design design of shear walls and slabs using results of FE analysis
5.       Earthquake resistant design - Code provisions and their background
6.       Ductile detailing of RC components Capacity design, detailing of beams, columns, joints, gravity columns, flat slabs
7.       Design and detailing of planar and non-planar shear walls and coupling beams, slab-wall connection
8.       ..... and complete real life example of a modern RCC tall building with different complications, in the last session


When: Saturday, December 19th, 2020 @11:00 AM to 6:30PM (IST)
Fees Rs. 750/- (including GST; GST No. 27AAACE8333R1Z3)


Register for this webinar, visit :  https://www.sefindia.org/?q=node/770


Who Should Attend:

Practicing Structural Consultants, Corporate Consultants, Govt/Semi Govt Authorities, Faculties of Structural Department from Engineering Colleges, PG Students 


Regards,
Epicons Friends of Concrete
Jayant Kulkarni
(Webinar Convener)
216/A, Amargian Complex, Khopat, LBS Road, Thane 400601, Maharashtra, INDIA. +91 22 25471144 / +91 7798155001
     



     
Download Attachments:
Webinar_116__1_.pdf





Posted via Email
Back to top
View user's profile Send private message
PRINCE DOSHI
SEFI Member
SEFI Member


Joined: 13 May 2020
Posts: 1

PostPosted: Thu Dec 03, 2020 3:30 pm    Post subject: WEBINAR -116 : Earthquake Resistant Design of High Rise RCC Structures - Modelling, Analysis & Design, 19 Dec 2020 Reply with quote

Hello sir,I want to attend this seminar very curiously but at the same date i have college work.
Still i want to enroll if i can learn from video and ppt. So will you provide video and ppt after session?
Thank you


On Wed, 2 Dec 2020, 14:24 admin, <forum@sefindia.org (forum@sefindia.org)> wrote:

Quote:
           This is a sponsored Media Announcement. (Advt.) Sponsor assumes responsibility of content below. To communicate further in this regard use contact links provided in the message below.

ANNOUNCEMENT of WEBINAR -116


Earthquake Resistant Design of High Rise RCC Structures - Modelling, Analysis & Design
by Prof (Dr.) Yogendra Singh - IIT, Roorkee

Topics to be covered in this Webinar -

1.      Introduction to earthquake analysis Response spectrum vs. time history
2.       Modelling of RC structures Frame, Shear wall, Flat Slab, URM infills, Joints, Floor diaphragms, Foundations Common errors            and pitfalls
3.       Code provisions on modelling and analysis Stiffness of cracked RC sections, Flanged beams, Inter-storey drift, P-Delta effects
4.       Interpretation of analysis results for design design of shear walls and slabs using results of FE analysis
5.       Earthquake resistant design - Code provisions and their background
6.       Ductile detailing of RC components Capacity design, detailing of beams, columns, joints, gravity columns, flat slabs
7.       Design and detailing of planar and non-planar shear walls and coupling beams, slab-wall connection
8.       ..... and complete real life example of a modern RCC tall building with different complications, in the last session


When: Saturday, December 19th, 2020 @11:00 AM to 6:30PM (IST)
Fees Rs. 750/- (including GST; GST No. 27AAACE8333R1Z3)


Register for this webinar, visit :  https://www.sefindia.org/?q=node/770


Who Should Attend:

Practicing Structural Consultants, Corporate Consultants, Govt/Semi Govt Authorities, Faculties of Structural Department from Engineering Colleges, PG Students 


Regards,
Epicons Friends of Concrete
Jayant Kulkarni
(Webinar Convener)
216/A, Amargian Complex, Khopat, LBS Road, Thane 400601, Maharashtra, INDIA. +91 22 25471144 / +91 7798155001
     



     
Download Attachments:
Webinar_116__1_.pdf





Posted via Email
Back to top
View user's profile Send private message
ashutos jena
SEFI Member
SEFI Member


Joined: 29 Mar 2014
Posts: 1

PostPosted: Thu Dec 03, 2020 6:30 pm    Post subject: WEBINAR -116 : Earthquake Resistant Design of High Rise RCC Structures - Modelling, Analysis & Design, 19 Dec 2020 Reply with quote

The modeling will be done in staad pro  software? 

On Wed, 2 Dec 2020, 20:58 admin, <forum@sefindia.org (forum@sefindia.org)> wrote:

Quote:
           This is a sponsored Media Announcement. (Advt.) Sponsor assumes responsibility of content below. To communicate further in this regard use contact links provided in the message below.

ANNOUNCEMENT of WEBINAR -116


Earthquake Resistant Design of High Rise RCC Structures - Modelling, Analysis & Design
by Prof (Dr.) Yogendra Singh - IIT, Roorkee

Topics to be covered in this Webinar -

1.      Introduction to earthquake analysis Response spectrum vs. time history
2.       Modelling of RC structures Frame, Shear wall, Flat Slab, URM infills, Joints, Floor diaphragms, Foundations Common errors            and pitfalls
3.       Code provisions on modelling and analysis Stiffness of cracked RC sections, Flanged beams, Inter-storey drift, P-Delta effects
4.       Interpretation of analysis results for design design of shear walls and slabs using results of FE analysis
5.       Earthquake resistant design - Code provisions and their background
6.       Ductile detailing of RC components Capacity design, detailing of beams, columns, joints, gravity columns, flat slabs
7.       Design and detailing of planar and non-planar shear walls and coupling beams, slab-wall connection
8.       ..... and complete real life example of a modern RCC tall building with different complications, in the last session


When: Saturday, December 19th, 2020 @11:00 AM to 6:30PM (IST)
Fees Rs. 750/- (including GST; GST No. 27AAACE8333R1Z3)


Register for this webinar, visit :  https://www.sefindia.org/?q=node/770


Who Should Attend:

Practicing Structural Consultants, Corporate Consultants, Govt/Semi Govt Authorities, Faculties of Structural Department from Engineering Colleges, PG Students 


Regards,
Epicons Friends of Concrete
Jayant Kulkarni
(Webinar Convener)
216/A, Amargian Complex, Khopat, LBS Road, Thane 400601, Maharashtra, INDIA. +91 22 25471144 / +91 7798155001
     



     
Download Attachments:
Webinar_116__1_.pdf





Posted via Email
Back to top
View user's profile Send private message
Durgaprasad Baliga
SEFI Member
SEFI Member


Joined: 27 Nov 2018
Posts: 1

PostPosted: Sat Dec 12, 2020 7:30 am    Post subject: WEBINAR -116 : Earthquake Resistant Design of High Rise RCC Structures - Modelling, Analysis & Design, 19 Dec 2020 Reply with quote

Dear Sir,I am not able to register. The site displays registration failure message. Screenshot attached.
Please look into it. Thank You.





On Wed, Dec 2, 2020 at 4:32 PM admin <forum@sefindia.org (forum@sefindia.org)> wrote:

Quote:
           This is a sponsored Media Announcement. (Advt.) Sponsor assumes responsibility of content below. To communicate further in this regard use contact links provided in the message below.

ANNOUNCEMENT of WEBINAR -116


Earthquake Resistant Design of High Rise RCC Structures - Modelling, Analysis & Design
by Prof (Dr.) Yogendra Singh - IIT, Roorkee

Topics to be covered in this Webinar -

1.      Introduction to earthquake analysis Response spectrum vs. time history
2.       Modelling of RC structures Frame, Shear wall, Flat Slab, URM infills, Joints, Floor diaphragms, Foundations Common errors            and pitfalls
3.       Code provisions on modelling and analysis Stiffness of cracked RC sections, Flanged beams, Inter-storey drift, P-Delta effects
4.       Interpretation of analysis results for design design of shear walls and slabs using results of FE analysis
5.       Earthquake resistant design - Code provisions and their background
6.       Ductile detailing of RC components Capacity design, detailing of beams, columns, joints, gravity columns, flat slabs
7.       Design and detailing of planar and non-planar shear walls and coupling beams, slab-wall connection
8.       ..... and complete real life example of a modern RCC tall building with different complications, in the last session


When: Saturday, December 19th, 2020 @11:00 AM to 6:30PM (IST)
Fees Rs. 750/- (including GST; GST No. 27AAACE8333R1Z3)


Register for this webinar, visit :  https://www.sefindia.org/?q=node/770


Who Should Attend:

Practicing Structural Consultants, Corporate Consultants, Govt/Semi Govt Authorities, Faculties of Structural Department from Engineering Colleges, PG Students 


Regards,
Epicons Friends of Concrete
Jayant Kulkarni
(Webinar Convener)
216/A, Amargian Complex, Khopat, LBS Road, Thane 400601, Maharashtra, INDIA. +91 22 25471144 / +91 7798155001
     



     
Download Attachments:
Webinar_116__1_.pdf





Posted via Email



image.png
 Description:
 Filesize:  219.97 KB
 Viewed:  38 Time(s)

image.png


Back to top
View user's profile Send private message
Display posts from previous:   
Post new topicReply to topic Thank Post    www.sefindia.org Forum Index -> SEFI General Discussion All times are GMT
Page 1 of 1

 

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


© 2003, 2008 SEFINDIA, Indian Domain Registration
Publishing or acceptance of an advertisement is neither a guarantee nor endorsement of the advertiser's product or service. advertisement policy