Forum SubscriptionsSubscriptions DigestDigest Preferences   FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups  RegisterRegister FAQSecurity Tips FAQDonate
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log in to websiteLog in to websiteLog in to websiteLog in to forum 
Warning: Make sure you scan the downloaded attachment with updated antivirus tools  before opening them. They may contain viruses.
Use online scanners
here and here to upload downloaded attachment to check for safety.

Reinforcement Identification

This forum is locked: you cannot post, reply to, or edit topics.This topic is locked: you cannot edit posts or make replies.    www.sefindia.org Forum Index -> E-Conference 20th June 2005
View previous topic :: View next topic  
Author Message
General Sponsor
General Sponsor

Joined: 26 Jan 2003
Posts: 104

PostPosted: Fri Jul 01, 2005 11:22 am    Post subject: Reinforcement Identification Reply with quote

Dear Colleagues:

Interesting reply from Tata Steel that they emboss the bars every one
meter or so.

Do we know of other manufacturers too doing that? Do we have someone
from SAIL on the e-conference? Will they like to respond?

With best regards,

Sudhir Jain

inchak@tatasteel.com wrote:

SEFI e-Conference on Steel Reinforcement from June 27 to July 10, 2005
Sponsored by TATA Steel

Dear Mr patel,
Thank you very much
I quote your letter and our response to the same

I am so happy that a conference has been organised on this subject. My
thanks to all concerned. I am new to the forum and have numerous questions
I would like to post but I will start with a site-related issue.
Quite often we recommend Fe500 TMT bars. However a few weeks into the
construction we are informed that there was amistake by the supplier and
the bars sent were really Fe 415.
This creates a lot of confusion and panic.
I was wondering if it is not possible for steel suppliers to create a
system of marking which clearly differentiates 415 from 500 steel. This
should be a standard system used by all manufacturers.

Tata steel Clearly EMBOSSES "TATA TISCON" for Fe 415, and "TISCON 500" for
Fe 500 at an interval of at most one meter on each bar.

It is also rather tragic that ever since Torsteel pretty much winded us,
there is no agency which provides a seal of quality conformance. As users
we do not know which are good mills to take TMTY bars from. It is not
always possible to buy steel form Tata, SAIL or Vizag steel as they are not
interested in small quanitites.

We do supply small quantities from our stock yards even to individual house
builders.We are a BIS Licensee and do provide a BIS Test Certificate for
every consignment.

I would appreciate if someone form Tata Steel whoa responsoring the
E-conference could respond to my queries.

Indranil Chakrabarti

Information contained and transmitted by this e-mail is confidential and
proprietary to Tata Steel Ltd. and is intended for use only by the
addressee. If you are not the intended recipient , you are notified that
any dissemination or copying of this e-mail is strictly prohibited and you
are requested to delete this e-mail immediately and notify the originator.
Tata Steel does not enter into any binding agreement with any party by
e-mail. Any views expressed by an individual do not necessarily reflect the
view of Tata Steel. Tata Steel is not responsible for the consequences of
any actions taken on the basis of information provided. While this e-mail
has been checked for all known viruses the addressee should also scan for
viruses. To know more about Tata Steel please visit www.tatasteel.com

The views, opinions, analyses and assessments contained herein do not necessarily reflect the views of SEFI or TATA Steel. Also SEFI and TATA Steel does not guarantee the accuracy of the data included in the proceedings of this e-conference and accepts no responsibility for any consequences of their use.
========powered by Reach1to1 Office Everywhere (http://www.reach1to1.com)======

Posted via Email
Back to top
View user's profile Send private message
Display posts from previous:   
This forum is locked: you cannot post, reply to, or edit topics.This topic is locked: you cannot edit posts or make replies.    www.sefindia.org Forum Index -> E-Conference 20th June 2005 All times are GMT
Page 1 of 1


Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum

© 2003, 2008 SEFINDIA, Indian Domain Registration
Publishing or acceptance of an advertisement is neither a guarantee nor endorsement of the advertiser's product or service. advertisement policy