www.sefindia.org

STRUCTURAL ENGINEERING FORUM OF INDIA [SEFI]

 Forum SubscriptionsSubscriptions DigestDigest Preferences   FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups  RegisterRegister FAQSecurity Tips FAQDonate
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log in to websiteLog in to websiteLog in to websiteLog in to forum 
Warning: Make sure you scan the downloaded attachment with updated antivirus tools  before opening them. They may contain viruses.
Use online scanners
here and here to upload downloaded attachment to check for safety.

structural system and response reduction factor (R)

 
This forum is locked: you cannot post, reply to, or edit topics.This topic is locked: you cannot edit posts or make replies. Thank Post    www.sefindia.org Forum Index -> E-conference on IS 16700 13th March to 18th March 2018
View previous topic :: View next topic  
Author Message
hemalmistry
...
...


Joined: 01 Jul 2009
Posts: 70

PostPosted: Tue Mar 27, 2018 5:08 am    Post subject: structural system and response reduction factor (R) Reply with quote

Structural system mentioned in clause 3.12.5 (core+outriggers) and 3.12.6 (core+outriggers+belt wall) have central core as LLRS only.

(1) Can we say these structural system confirms to "structural wall (located at core)" as per Table 1 & 2 for permissible height and aspect ratio requirement?

(2) Response reduction factor for such structural system with ductile central core is 4 as per IS:1893-1-2016?


Structural system mentioned in clause 3.12.7 (framed tube) have perimeter frame as LLRS only.

(1) Can we say such structural systems (though suitable for tall building as mentioned by code) are not allowed by code as no permissible height and aspect ratio requirements are mentioned in  Table 1 & 2?

(2) What could be Response reduction factor for such system?

Structural system mentioned in clause 3.12.8 (tube in tube), 3.12.9 (multiple tube) have perimeter frame and central core as LLRS.

(1) Can we say these structural system confirms to "structural wall+framed tube" as per Table 1 & 2 for permissible height and aspect ratio requirement?

(2)  Response reduction factor for such structural system with ductile central core+ductile perimeter frame is 5 (if dual system) and 4 (if not dual system) as per IS:1893-1-2016?

Structural system 3.12.7,3.12.8 & 3.12.9 consists closely spaced column connected by deep beams.

(1) Aspect ratio (b/d) and span/depth ratio requirement of IS:13920-2016 are also applicable to these deep beams connecting closely spaced column?

(2) Ductility requirement (design and detailing) for such deep beams shall be as per IS:13920-2016?

(3) Can we say if such frame with closely spaced column with deep beams are designed and detailed as per IS:13920-2016 then response reduction factor can be taken accordingly? Generally, short span deep beams are not ductile as per IS:1390-2016.

Regards
hemal


Back to top
View user's profile Send private message
Display posts from previous:   
This forum is locked: you cannot post, reply to, or edit topics.This topic is locked: you cannot edit posts or make replies. Thank Post    www.sefindia.org Forum Index -> E-conference on IS 16700 13th March to 18th March 2018 All times are GMT
Page 1 of 1

 

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum


© 2003, 2008 SEFINDIA, Indian Domain Registration
Publishing or acceptance of an advertisement is neither a guarantee nor endorsement of the advertiser's product or service. advertisement policy