View previous topic :: View next topic |
Author |
Message |
rk SEFI Regulars
Joined: 09 May 2009 Posts: 20
|
Posted: Mon Oct 01, 2018 2:47 pm Post subject: Re: Excel Program for Column Load Calculations |
|
|
Sir
Please send the activation code to mail id raghukrag@gmail.com |
|
Back to top |
|
|
rajumuralinr SEFI Member
Joined: 25 Oct 2011 Posts: 1
|
Posted: Sun Mar 10, 2019 10:54 am Post subject: Re: Excel Program for Column Load Calculations |
|
|
sagarvk wrote: | I have designed a excel sheet for Column Load Calculations. It uses tributary area method and other few parameters. Also there is a program to design the column.
Steps for using the file are as follows.
1. Input the Slab thickness, Live Load, Floor Finish etc data.
2. Start Entering the inputs for column like column name, Length of tributary area (L), Width of tributary area (L)etc. the loads will be calculated automatically based on the inputs and column positions.
Note - This is a Demo for 10 trials, after the demos finish, will have to get the activation code. Please mail for activation code. |
Please send Activation Code to my Mail ID : rajumuralinr@gmail.com ,
Serial NO: DE5F - OE3C |
|
Back to top |
|
|
srinivasa rao palla SEFI Member
Joined: 13 Apr 2010 Posts: 9
|
Posted: Sun Mar 10, 2019 9:30 pm Post subject: Excel Program for Column Load Calculations |
|
|
Dear sir, please send me the demo version
Posted via Email |
|
Back to top |
|
|
rehan0129 SEFI Member
Joined: 13 Aug 2010 Posts: 7 Location: Mumbai
|
Posted: Mon Mar 11, 2019 4:00 am Post subject: No moment is considered in design |
|
|
Your sheet considers only axial load in design, what about the moment? Columns in practical are subjected to biaxial bending which significantly reduces the column capacity. Column capacity is usually governed by its slenderness and ignoring that can be catastrophic even if the structure is of less importance. All through these years of my experience, I have learned that designing of columns is the most critical and most important part and therefore it cannot be simply designed by vertical loads alone. I suggest you to kindly take this down as some novice engineer who must be absolutely new in to the field may use it without putting his/her own thoughts. Let us not new engineers with ready made stuffs, let them scratch their brains and learn which will serve them in the long run. |
|
Back to top |
|
|
PushkarKokane General Sponsor
Joined: 18 Dec 2017 Posts: 22
|
Posted: Sat Mar 16, 2019 9:48 am Post subject: Re: Excel Program for Column Load Calculations |
|
|
sagarvk wrote: | I have designed a excel sheet for Column Load Calculations. It uses tributary area method and other few parameters. Also there is a program to design the column.
Steps for using the file are as follows.
1. Input the Slab thickness, Live Load, Floor Finish etc data.
2. Start Entering the inputs for column like column name, Length of tributary area (L), Width of tributary area (L)etc. the loads will be calculated automatically based on the inputs and column positions.
Note - This is a Demo for 10 trials, after the demos finish, will have to get the activation code. Please mail for activation code. |
668E-2860
pushkar.kokane@gmail.com |
|
Back to top |
|
|
naga ...
Joined: 15 Sep 2011 Posts: 52
|
Posted: Mon Mar 18, 2019 5:35 am Post subject: |
|
|
please send me activation code mani.malli@rediffmail.com
thank you |
|
Back to top |
|
|
naga ...
Joined: 15 Sep 2011 Posts: 52
|
Posted: Mon Mar 18, 2019 5:37 am Post subject: Re: Excel Program for Column Load Calculations |
|
|
please send me activation code mani.malli@rediffmail.com
thank you
sagarvk wrote: | Ihave designed a excel sheet for Column Load Calculations. It uses tributary area method and other few parameters. Also there is a program to design the column.
Steps for using the file are as follows.
1. Input the Slab thickness, Live Load, Floor Finish etc data.
2. Start Entering the inputs for column like column name, Length of tributary area (L), Width of tributary area (L)etc. the loads will be calculated automatically based on the inputs and column positions.
Note - This is a Demo for 10 trials, after the demos finish, will have to get the activation code. Please mail for activation code. |
|
|
Back to top |
|
|
kesavalu SEFI Member
Joined: 14 May 2008 Posts: 15
|
Posted: Tue Apr 16, 2019 4:25 am Post subject: Column load calculations |
|
|
Please send activation code to kesavalu1942@yahoo.com
KESAVALU |
|
Back to top |
|
|
saistructure Gold Sponsor
Joined: 26 Jan 2003 Posts: 84
|
Posted: Wed Apr 17, 2019 3:47 pm Post subject: kindly send activation code on saistructure@gmail.com |
|
|
kindly send activation code on saistructure@gmail.com |
|
Back to top |
|
|
viki2312000 SEFI Member
Joined: 04 Aug 2009 Posts: 1
|
Posted: Tue Jul 16, 2019 5:13 am Post subject: password |
|
|
Sir,
SERIAL NO : A614-DD92
please send the activation code to vivek2312000@gmail.com
thank you
|
|
Back to top |
|
|
|