www.sefindia.org

STRUCTURAL ENGINEERING FORUM OF INDIA [SEFI]

 Forum SubscriptionsSubscriptions DigestDigest Preferences   FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups  RegisterRegister FAQSecurity Tips FAQDonate
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log in to websiteLog in to websiteLog in to websiteLog in to forum 
Warning: Make sure you scan the downloaded attachment with updated antivirus tools  before opening them. They may contain viruses.
Use online scanners
here and here to upload downloaded attachment to check for safety.

Development Length at External Joint (Advice needed)

 
Post new topicReply to topic Thank Post    www.sefindia.org Forum Index -> SEFI General Discussion
View previous topic :: View next topic  
Author Message
Pramod123
SEFI Member
SEFI Member


Joined: 06 Apr 2020
Posts: 3

PostPosted: Wed Sep 23, 2020 4:52 am    Post subject: Development Length at External Joint (Advice needed) Reply with quote

Hello Sefians,
I am little confused in IS codes regarding development length in an external Beam-column joint.
My confusions are :
1.If Ld in Top & Bottom bars of beam=Ld in tension+10d-90 bend allowance (IS 13920:1993,cl 6.2.5),why there is value of Ld for Tension bars and compression bars in (SP-16:1960 ,Table 65),Isnt Ld value for Tension bars enough ?
2.Allowance for 90 bend is given only for Tension=8*d (SP-16,cl 5.2),What is the allowance for 90 bend for compression ?
3.For Fe415 ,M20 concrete grade and 16mm dia bar ,What will be the Ld for upper and lower bars as in picture ?
In my opinion is it:Ld of upper bar(Compression)=Ld for Tension+10*dia
                 :Ld for Lower bar(Tension)=Ld for Tension+10*dia-8*dia




Question (1).jpg
 Description:
 Filesize:  1.46 MB
 Viewed:  142 Time(s)

Question (1).jpg


Back to top
View user's profile Send private message
Display posts from previous:   
Post new topicReply to topic Thank Post    www.sefindia.org Forum Index -> SEFI General Discussion All times are GMT
Page 1 of 1

 

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


© 2003, 2008 SEFINDIA, Indian Domain Registration
Publishing or acceptance of an advertisement is neither a guarantee nor endorsement of the advertiser's product or service. advertisement policy